Injection material Product List and Ranking from 22 Manufacturers, Suppliers and Companies

Civil engineering repair epoxy resin injection material 'BO Mejikong #301/#303'

Since it does not contain volatile solvents, the shrinkage after curing is extremely small! It helps shorten the construction period.

"BO MejiCon #301/#303" is an epoxy resin-based adhesive that demonstrates excellent performance in injecting concrete cracks. It has good permeability to concrete and curing and adhesion properties on wet surfaces, and since it does not contain volatile solvents, it has extremely low shrinkage after curing. Its excellent workability helps shorten construction time. Furthermore, "BO MejiCon #301" is widely used for fixing anchor bolts and as a solvent-free primer for wet surfaces. 【Features】 ■ Low viscosity and excellent workability ■ Suitable for repairing cracks from 0.2mm to 5.0mm ■ "BO MejiCon #301" has good adhesion on wet surfaces *For more details, please download the PDF or feel free to contact us.

Company：日塗化学西日本営業所
Price：Other

glue
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inorganic injection material "Fine Shot Micro"

Excellent adhesion! Ultra-fine particle high-performance polymer cement-based injection material with improved fine injection properties!

"Fine Shot Micro" is an inorganic injection material that combines high-performance water-reducing agents with acrylic emulsion in a furnace slag-based fine particle powder. This high-performance water-reducing agent allows for good fluidity with a reduced amount of water. Additionally, the inclusion of acrylic emulsion provides excellent adhesion. 【Features】 ■ Can be injected into internal voids of about 0.1mm if the surface crack width is 0.2mm or more. ■ As an inorganic injection material similar to the properties of concrete, it is resistant to aging and has excellent durability. ■ Reduces curing shrinkage. ■ Excellent waterproofing properties. ■ Low cost. *For more details, please refer to the PDF document or feel free to contact us.

Company：エレホン・化成工業大阪支店
Price：Other

others
Coating film waterproofing material/permeable waterproofing material
Reinforcement and repair materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection material "Zypex Ultra Paste EX"

A sealing material that can immediately repair and restore water leakage caused by cracks in concrete structures!

"Zypex Ultra Paste EX" is a moisture-foaming polyurethane material that can stop water leaks by injecting it into cracks in concrete structures. Additionally, as a powerful adhesive, it can completely bond metals, plastics, wood, and concrete to each other in a short time, whether on dry surfaces or underwater. [Features] ■ Solvent-free and highly safe For more details, please refer to the catalog or feel free to contact us.

Company：日本ザイペックス
Price：Other

Reinforcement and repair materials
Concrete construction
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic Injection Material Super Ecomax

Mixing fly ash to fill voids behind the tunnel lining.

The plastic injection material Super Eco Max is a plastic injection material mixed with fly ash, designed to fill voids such as those behind tunnel linings constructed using conventional methods. It employs an inline mixing method where the base material and plastic material are pumped through separate piping systems and mixed using a static mixer near the injection site, allowing for long-distance pumping. Applicable locations include the back of waterway tunnel linings, the back of road tunnel linings, and the lower part of structural foundations. For more details, please contact us or refer to the catalog.

Company：ファテック
Price：Other

Bridge Construction
Dam construction
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultra-microparticle non-separation type blast furnace slag-based injection material Ultra Micro Grain

Cement injection has evolved. An inorganic cement injection material that ensures high fluidity without separation under high pressure.

Ultra Micro Grain is an inorganic injection material primarily composed of ultra-fine particle cement derived from blast furnace slag. Due to its special powder formulation, it possesses resistance to separation in water, preventing issues such as bleeding and sedimentation. Unlike conventional inorganic injection materials, which struggle with high-pressure injection, Ultra Micro Grain enables the filling of fine voids and deep areas of concrete structures thanks to its high fluidity when used with TAP injection machines. Ultra Micro Grain can be utilized in a wide range of applications, allowing for both automatic low-pressure injection and high-pressure injection.

Company：茶谷産業東京支社
Price：10,000 yen-100,000 yen

Bridge Construction
Waterproofing work
Roof and gutter construction
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Press Down Grout Method

Ideal for repairing tile lifting! Partial construction is possible! It's an economical method with a short construction period.

The "Press Down Grout Method" is the ideal technique for repairing the lifting of directly laid 50 two-piece tiles that are difficult to inject. An aluminum frame is installed, and the tiles are pressed against the wall before injecting the resin. The pressure during injection is restrained by the frame, so the lifting force is converted into a force that spreads the resin under the tiles. As a result, the resin can be injected with strong force without worrying about warping or cracking of the tiles, allowing it to spread throughout the entire lifted area. 【Features】 ■ The injection material can be evenly spread over the lifted area. ■ There is no need to replace the tiles, so the design remains unchanged. ■ Partial repairs are possible and efficient. ■ Almost no industrial waste is generated. ■ Patent-acquired method (No. 5127945). *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：アサヒボンド工業
Price：Other

Concrete construction
Tile work
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Durable inorganic solution-type silica sol grout "Hard Riser Seven"

It demonstrates outstanding long-term durability, safety, and convenience. It is suitable for full-scale temporary injection work.

The "Hardlizer Seven" includes the instant-setting type "Hardlizer Seven S" and the slow-setting type "Hardlizer Seven L," making it suitable for all types of injection methods. The "Hardlizer Seven" is a durable inorganic solution type silica sol grout, which was developed in the early 1970s and has made significant advancements as a result of years of research and development, boasting a track record of 50,000 construction cases. The well-known trademark "Silica Sol" in the field of chemical injection refers to the injection material based on non-alkaline water glass obtained by neutralizing the alkalinity of water glass with acid. Notably, research on the durability of chemical injection conducted at the Toyo University Institute of Industrial Technology's Yokokura Laboratory, which began in 1982, clarified the long-term durability of silica sol grout, and this was demonstrated by excavation surveys at construction sites from 17 years ago. Additionally, large-scale outdoor tests have confirmed the permeability and solidification properties after 19 years. 【Feature 1】 1. Excellent applicability: The gel time can range from instant-setting to slow-setting, allowing it to be applied to all types of injection methods. 2. Excellent solidification: It excels in solidification below the groundwater level, ensuring that all injected material solidifies in the soil. It also has excellent water-stopping properties... (continues to Feature 2)

Company：強化土エンジニヤリング
Price：Other

Ground improvement materials
Ground foundation construction method
Railway Construction
Injection material

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Durable inorganic solution-type silica sol grout series [NETIS registered]

Silica sol grout (Hardizer Seven, Clean Lock 4, Silica Riser, etc.) is a liquid injection material that excels in durability, safety, and convenience.

The "Durable Inorganic Solution Type Silica Sol Grout Series" [NETIS Number: KT-200081-A] is a durable inorganic solution type silica sol grout based on silica sol obtained by removing alkalis, which are factors for the degradation of water glass grout, with acid. It provides permeability and durability based on an acidic silica sol with a long gelation time, and by suppressing the leaching of silica, it excels in quality (durability) and cost-effectiveness. Furthermore, by adding in-situ gelation permeation methods (Magma Action Method) and masking silica methods, it enables extensive permeation solidification effects, solidification effects below the groundwater level, and safety for buried objects in the soil. Additionally, by integrating on-site soil mixing design methods, silica analysis ground silicification evaluation methods, accelerated testing methods, and specimen preparation equipment and testing methods, durable ground improvement using injection materials has become possible. Moreover, the pH of the injected ground is neutral, and since it is composed entirely of inorganic materials, it has high water quality preservation and excellent safety for aquatic organisms.

Company：強化土エンジニヤリング
Price：Other

Ground improvement
Ground foundation construction method
Ground improvement materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane injection

Shorten working hours! It cures underwater and has excellent water resistance.

"Urethane injection" is a speedy backfill injection method using rigid foam urethane. It cures quickly, allowing for immediate use after the backfill work in the cavity. It reaches final strength in just about 30 minutes, starting to harden after 1 minute, using a rapid foaming and curing material. After curing, there is almost no expansion or contraction, allowing for complete filling. It also foams and cures underwater, demonstrating excellent water-stopping properties. 【Features】 ■ Quick curing ■ Immediately available for tunnel use ■ Stable quality ■ Can be constructed in a compact working environment ■ Low cost *For more details, please refer to the PDF materials or feel free to contact us.

Company：北陸エースコン
Price：Other

Earthworks
Pile and foundation work
Special Construction Method
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane cable anti-corrosion injection material "Thermo-Slew M75"

In the future, it can be relatively easily removed for attaching or replacing the fixed body!

"Thermosul M75" is a corrosion-inhibiting injection material for a waterproof PC bridge system holder. It reacts at room temperature to become a rubber elastomer, permanently sealing and protecting the fixation area and wire strands from corrosion, making it particularly suitable for the corrosion protection of single-tube external cable fixings. Additionally, it is a product that balances practical performance and cost, and has received numerous achievements. 【Features】 ■ Exhibits excellent durability against vibration, bending, and impact loads ■ Rich in elasticity, it follows the expansion and contraction of cables and vibrations without issue ■ Demonstrates good water tightness, protecting the fixation area and wire strands from corrosion ■ Low viscosity with excellent fluidity, penetrating into small gaps ■ Cures at room temperature without shrinkage due to the volatilization of solvents ■ Relatively easy to remove for future detachment or replacement of the fixing body *For more details, please refer to the PDF document or feel free to contact us.

Company：中国塗料
Price：Other

paint
Subsidiary materials
Safety and consumables
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semi-flexible pavement injection material "New Funcoat 50"

Even at a mother material asphalt concrete temperature of 60 to 80°C, it reliably penetrates the gaps! It maintains stable strength over a long period.

"New Funcoat 50" is an injection milk material for semi-flexible pavement that contains re-emulsified powdered polymer. By simply mixing with water, it exhibits high permeability and stable strength and durability, enabling high-quality construction. It maintains necessary fluidity even after 30 to 60 minutes post-mixing, making it advantageous for detailed finishing injections with a small amount reserved, resulting in a beautiful finish. 【Features】 ■ Achieves labor-saving with a 5.5% reduction in powder compared to conventional products (our comparison) ■ Excellent injectability at high temperatures ■ High fluidity retention performance ■ Long-term strength stability ■ Pre-mixed with re-emulsified powdered polymer *For more details, please refer to the PDF materials or feel free to contact us.

Company：竹中産業
Price：Other

Premixed mortar
Mortar and plaster materials
Injection material

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tanalith CY injection material (preservative and anti-termite injection material)

No use of hexavalent chromium or arsenic! The emission of "formaldehyde" is equivalent to untreated wood.

"TANARIS CY injection material" is a cost-effective exterior wood product. The pressure injection treatment is carried out by a company with a long track record in Japan. After the wood treatment and curing, the main components do not dissolve even when exposed to rain or water. The preservative "TANARIS CY" is an environmentally friendly, low-toxicity pressure-injection wood preservative and anti-termite agent, primarily composed of safe copper compounds and cyproconazole. 【Features】 ■ After the wood treatment and curing, the main components do not dissolve even when exposed to rain or water. ■ Does not contain "chlorpyrifos," which is prohibited by building standards. ■ Does not use highly toxic hexavalent chromium or arsenic. ■ The emission level of "formaldehyde," which is subject to sick house regulations, is equivalent to untreated wood. *For more details, please refer to the related links or feel free to contact us.

Company：木工ランド
Price：Other

Wood and wood-based siding
Wood-based board
Wood-based board
Injection material

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Rock Solidification Injection Material "RBS-USR (Silica Resin)"

Exhibits effectiveness even in a limited range of improvements with early strength development! Flame-retardant rock solidifying material.

"RBS-USR (Silica Resin)" is a rock solidification material developed for the improvement and modification of tunnel ceilings, faces, and slopes. It exhibits rapid strength development and demonstrates sufficient effectiveness even within limited improvement areas. Additionally, the solidified material is highly safe and has excellent flame retardant properties. It can be widely used in various applications, including the FIT method, fore-poling method, AGF method, and other auxiliary methods for tunnel excavation. 【Features】 ■ Rapid strength development ■ Sufficient effectiveness even in limited improvement areas ■ Solidified material is highly safe with excellent flame retardant properties ■ Widely applicable in various uses *For more details, please refer to the PDF document or feel free to contact us.

Company：ケー・エフ・シー
Price：Other

Subsidiary materials
Tunnel Materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Plastic filling injection material "JPG Plas-ZERO"

Capable of long-distance pumping of approximately 4,000m! A low shrinkage, long-distance pumping type of plastic filling injection material.

"JPG Plas-ZERO" is a two-shot type of plastic filling injection material that possesses plasticity and non-shrinkage, suitable for filling cavities and gaps. It allows for long-distance pumping of approximately 4,000 meters by mixing equal amounts of the two components at the tip. Depending on the size of the cavity or gap, you can select the gel time at which the injection material becomes plastic. It is resistant to water diffusion and dilution in still water, exhibiting non-separation in water. Additionally, it experiences almost no shrinkage after curing. 【Features】 ■ Low shrinkage and long-distance pumping type ■ Capable of long-distance pumping of approximately 4,000 meters ■ Ability to select the gel time at which the injection material becomes plastic ■ Exhibits non-separation in water ■ Almost no shrinkage occurs after curing *For more details, please refer to the PDF document or feel free to contact us.

Company：日本基礎技術東京本社
Price：Other

Tunnel Materials
Bridge Materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semi-flexible pavement premix injection material "Hoso Ace Ultra Fast Hardening Type"

Early traffic opening is possible! A compressive strength of over 5 MPa can be achieved with a curing time of 3 hours.

We would like to introduce our semi-flexible pavement premixed injection material, "Hoso Ace Ultra Fast Hardening Type." This premixed type of semi-flexible pavement injection material was developed by our company to simplify the injection work at construction sites for semi-flexible pavements. Since we use carefully selected raw materials in the premix, you can obtain a uniform semi-flexible pavement cement milk by simply mixing it with water on-site. 【Features】 ■ Early traffic opening possible: Achieves a compressive strength of over 5MPa with a curing time of 3 hours ■ Curing characteristics at low temperatures: Curing is good even during injection work at low temperatures, such as winter nights ■ Complies with the design guidelines of the East Japan, Central Japan, and West Japan Expressway Companies, Volume 1, Pavement Section, Semi-flexible Pavement Design and Construction Manual 2-4-2 "Cement Milk" ■ Complies with the Japan Road Association's Pavement Construction Handbook 9-4-1 Semi-flexible Pavement "Permeable Cement Milk" *For more details, please download the PDF or feel free to contact us.

Company：MUマテックス
Price：Other

Paving Materials
cement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-retaining pavement premixed injection material "Hoso Ace Water-retaining Type 60"

Ideal as a 100% permeable water-retaining pavement injection material! It is expected to have lasting effects in suppressing road surface temperature rise.

We would like to introduce our product, "Hoso Ace Water Retaining Type 60." This is a premixed type of injection material for water-retaining pavement developed by our company. Since we use carefully selected raw materials in a premixed form, you can simply mix it with water on-site to obtain a uniform water-retaining cement milk for pavement. Our company offers a wide range of appropriate products with keywords such as longevity, labor-saving construction, aesthetics, and environmental conservation, which are required for future social infrastructure. 【Features】 ■ Suitable as a 100% permeable injection material for water-retaining pavement ■ Can accumulate a large amount of water with a maximum water absorption rate of about 60% ■ Expected to have sustained effects in suppressing surface temperature rise ■ Curing time until traffic can be opened is approximately 3 hours *For more details, please download the PDF or feel free to contact us.

Company：MUマテックス
Price：Other

Paving Materials
cement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semi-flexible pavement premix injection material "Hoso Ace eco standard type"

CO2 emissions during manufacturing have been reduced by approximately 40% compared to conventional methods! This is a low-carbon type of injection material.

The "Hoso Ace Eco Standard Type" is a premixed type of low-carbon semi-flexible pavement injection material developed by our company. By adding special admixtures, it has become possible to achieve strength properties equivalent to conventional products. Traffic can be opened within 3 days (excluding winter). 【Features】 ■ By adding industrial by-products, CO2 emissions during manufacturing are reduced by approximately 40%. ■ Exhibits strength properties equivalent to conventional products. ■ Curing time until traffic can be opened is about 3 days (excluding winter). ■ A stable semi-flexible pavement permeable cement milk can be produced simply by mixing the specified amount of mixing water on-site. *For more details, please download the PDF or feel free to contact us.

Company：MUマテックス
Price：Other

Paving Materials
cement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] Concrete Structure Repair Methods

Repair work is essential for restoring deterioration and maintaining concrete structures for a longer period.

This document provides information on the "Concrete Structure Repair Method" that addresses repairs primarily related to cracking, lifting, damage, and water leakage. We introduce the "SK Grout Plug A Method," which allows for low-pressure and low-speed injection for fine cracks that occur in concrete structures. Additionally, we have included injection materials such as JIS A 6024 injection epoxy resin (rigid type) with low viscosity, medium viscosity, and rust-inhibiting agents, which you can utilize when considering implementation. 【Contents (Excerpt)】 ■ Method Section - Examples of deterioration in concrete structures - Flowchart for selecting concrete structure repair methods - Crack repair using SK Grout Plug A Method - Crack repair using SK Grout Plug B Method *For more details, please download the PDF or feel free to contact us.

Company：シーカ・ジャパン
Price：Other

Concrete construction
Renovation and repair methods
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane-based injection materials "NEW-TSRF, NEW-TBU"

It demonstrates high cost performance as an injection material for various auxiliary construction methods!

In recent years, tunnel construction sites have been required to respond to strict conditions, such as construction in urban areas and low cover depths. Under such conditions, the "injection-type pre-support method" has been widely adopted as a safe, reliable, and cost-effective auxiliary construction method. Among the injection materials used in the injection-type pre-support method, silica resin-based injection materials are utilized as they meet many of the demands required on-site, including strength, permeability, safety, and even economic efficiency. 【Features】 ○ Compatible with various geological conditions and construction methods ○ Can efficiently improve the ground For more details, please contact us or download the catalog.

Company：エスティーエンジニアリング
Price：Other

Safety and consumables
Bridge Construction
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Paving Heating Construction Type Crack Injection Material "Super Flex"

It firmly adheres to cracks with high flexibility and adhesion, contributing to the longevity of the pavement. A dedicated melting furnace is also available.

"Super Flex" is a heat-applied crack injection material suitable for repairing cracks in asphalt and concrete pavements. It excels in flexibility and adhesion, adhering strongly while flexibly following the movement of the pavement, contributing to improved waterproofing and durability. By using the dedicated melting furnace "Mini Melter," efficiency in construction can be enhanced, reducing the burden of on-site work. 【Features】 ■ Maintains high adhesion and flexibility without melting even in summer temperatures ■ High flexibility against variations in joint width, making it suitable for cold regions and high-traffic areas ■ Prevents rainwater infiltration from crack areas, contributing to the longevity of the pavement ■ Reduces noise and vibration from vehicles through stress relief *For more details, please refer to the materials. Feel free to contact us with any inquiries.

Company：Hoshin Co., Ltd.
Price：10,000 yen-100,000 yen

glue
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Inorganic and organic common solution type injection material "Sankopole PSV Series"

Introducing a solution-type injection agent that allows for the differentiation between inorganic and organic using the same hardener.

The "Sankorpol PSV Series" is an inorganic and organic common solution-type injection material that provides stable and highly reproducible gel times. It has excellent solubility and allows for the selection of organic or inorganic systems depending on the presence of an enhancer. The "organic formulation" achieves high strength, and the amount of wash water is significantly reduced compared to the inorganic system. Additionally, the "inorganic formulation" is completely inorganic, so water quality management only requires pH control. For 200L of Solution A, the amount of water glass can be chosen from 80L or 100L. 【Features】 ■ Solution-type water glass grout material ■ Completely free of toxic and hazardous substances, ensuring high safety (B solution pH 7.6–7.9) ■ Provides stable and highly reproducible gel times ■ Excellent solubility ■ Allows for the selection of organic or inorganic systems depending on the presence of an enhancer *For more details, please refer to the PDF document or feel free to contact us.

Company：三興コロイド化学
Price：Other

Other civil engineering works
Safety and consumables
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance polyurethane for cavity filling and backfilling injection 'AGSR-FI'

It reaches final strength in a short time! It is a highly safe material that takes into consideration the environment and ecosystems.

"AGSR-FI" is a polyurethane foam that cures and expands quickly by mixing polyols and modified isocyanates. It reaches its final strength in a short time, allowing immediate use of the tunnel after construction, and it can cure and expand even underwater, making it usable in spring water environments. By utilizing it as a filling material for back cavities of existing tunnels, it helps restore the structural functions inherent to the tunnel and contributes to the extension of the lifespan of existing tunnels. 【Features】 - It reaches its final strength quickly, allowing immediate use of the tunnel after construction. - It can cure and expand underwater, making it usable in spring water environments. - The foam has independent bubbles, so high water-stopping properties are expected after curing. - Its low foam density means that the load on the lining concrete is minimized. - It complies with the "Guidelines for Safety Management of Polyurethane Injection Materials in Mountain Tunnel Construction." *For more details, please refer to the PDF document or feel free to contact us.

Company：フジモリ産業
Price：Other

Tunnel construction
Tunnel Materials
Other civil engineering works
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Urethane injection material "AGSR-PSG"

For tunnel auxiliary construction methods! A polyurethane injection material with excellent ground improvement effects and water inflow resistance.

"AGSR-PSG" is a polyurethane injection material (AGSR-PSG) that solidifies by mixing polyol and polyisocyanate, making it a ground consolidation material with high foaming pressure and excellent solidification properties. It is difficult to dilute in spring water environments, allowing for reliable ground improvement through foaming. Due to its low viscosity compared to typical polyurethane injection materials, it has excellent permeability and can facilitate localized improvement around bolts and steel pipes. [Features] ■ Excellent ground improvement effect ■ Low viscosity compared to typical polyurethane injection materials, allowing for excellent permeability and localized improvement around bolts and steel pipes ■ Higher foaming pressure than silica resin, enabling penetration and improvement of fine cracks in fractured ground *For more details, please refer to the PDF document or feel free to contact us.

Company：フジモリ産業
Price：Other

Ground improvement materials
Ground improvement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Silica resin injection material "AGSR"

Polyurethane injection material for tunnel auxiliary construction methods! It excels in ground improvement effects.

"AGSR" is a ground consolidation material made from rapidly foaming modified polyurethane by mixing special sodium silicate and modified polyisocyanate. It is an injection material with excellent economic efficiency and flame resistance, with numerous achievements in a wide range of geological conditions, and it complies with the "Guidelines for Polyurethane Injection in Mountain Tunnel Construction" issued in February 2020. Since it can foam and provide localized improvement within the ground, the injection volume is small, making the total cost comparable to that of cement injection materials. 【Features】 ■ Excellent permeability, allowing for localized improvement around bolts and steel pipes ■ Rapid strength development, resulting in the formation of high-strength consolidated bodies ■ Greater adhesive strength for consolidating rock masses compared to cement-based injection materials ■ Easily accommodates leaks from the ground with interval injections ■ Short rise time allows for consolidation even in the presence of groundwater, minimizing impact on the surrounding environment *For more details, please refer to the PDF document or feel free to contact us.

Company：フジモリ産業
Price：Other

Tunnel Materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Permanent injection material "Soil Support A" for double pipe strainer method.

A permanent injection material that improves quality in the long term! Suitable for foundation improvement work such as seismic reinforcement construction!

This product is a permanent injection material that forms a stable solid by mixing and reacting ultra-fine slag, the main material, with ultra-fine alkaline calcium, using special water glass as a hardener. It excels in strength and durability. The setting time can be adjusted according to the conditions of the work site. It also has good permeability, making it ideal for liquefied ground and seismic reinforcement. 【Features】 ■ High safety ■ Adjustable setting time ■ Excellent durability, etc. *For more details, please refer to the catalog or feel free to contact us.

Company：日本クリーン薬材
Price：Other

Airport facilities
River construction
Ground improvement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Permanent injection material "Soil Support Ace α-75"

Gel time can be adjusted by the amount of additive! High-strength permanent injection material for double-tube strainer method.

"Soil Support Ace α-75" is a permanent injection material with excellent gelling ability, providing a stable gel time. By improving the hardener of the existing Soil Support Ace, it has become possible to mix in three tanks instead of the conventional four, enhancing workability. The gel time can be adjusted by the amount of accelerator added, and the solidification strength is maintained over the long term, with minimal material shrinkage and excellent durability. 【Features】 ■ Improved workability by enabling mixing in three tanks instead of four ■ Excellent gelling ability, providing a stable gel time ■ Gel time can be adjusted by the amount of accelerator added ■ Solidification strength is maintained over the long term, with minimal material shrinkage and excellent durability ■ Provides protective effects for structures (concrete, steel frames) *For more details, please refer to the PDF document or feel free to contact us.

Company：日本クリーン薬材
Price：Other

Subsidiary materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-separating suspension system injection material "GEOFORCE"

Not diluted even in flowing water! Can be injected using pipes of general liquid injection equipment, etc.

"GEOFORCE" is a non-separating underwater suspension injection material that allows for control of strength by altering its composition. Due to its non-separating underwater properties and excellent plasticity, it can be injected without being washed away even in ground with large voids like gravel and flowing water. Additionally, it has high fluidity, allowing it to fill narrow gaps. 【Features】 ■ Excellent non-separating underwater properties and high filling capacity even in flowing water ■ Superior plasticity ■ Excellent permanence ■ Strength can be controlled ■ Can be applied with compact construction equipment ■ Can be mixed with seawater *For more details, please refer to the PDF document or feel free to contact us.

Company：ケミカルグラウト
Price：Other

Ground foundation construction method
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crack injection material "Ascleet Crack Men"

Crack repair can be done easily and quickly! It is easy to handle and allows for fast and safe work.

The 'Ascleet Crack Men' is a crack injection material that exhibits the characteristics of a reaction-curing MMA type (fast curing and durability). By packaging it as a kit, it eliminates the hassle of measuring and does not require any special tools, making it easy to repair cracks and joints in asphalt pavement. It excels in fast curing and durability, and it cures even at low temperatures (0°C). Please feel free to contact us if you have any inquiries. [Features] ■ Easy to handle, allowing for quick and safe work ■ Excellent adhesion, no primer required ■ Superior fast curing and durability ■ Cures even at low temperatures (0°C) ■ Once cured, the material does not melt due to heat *For more details, please download the PDF or feel free to contact us.

Company：美州興産東京営業所
Price：Other

Reinforcement and repair materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cement-based injection material "Arma #600"

Excellent durability and weather resistance! Cleaning after installation can be done with just water.

"Armor #600" is a cement-based injection material that can be injected into cracks with a surface crack width of 0.2mm or more. Injection is performed using a low-pressure injection method and can only be used when the inside of the crack is in a moist state; it cannot be used when dry. Additionally, the composition of the hardened material is similar to the paste portion of concrete, providing excellent integrity. 【Features】 ■ Injection is performed using a low-pressure injection method ■ Can only be used when the inside of the crack is in a moist state ■ Cannot be used when dry ■ The composition of the hardened material is similar to the paste portion of concrete, providing excellent integrity *For more details, please download the PDF or feel free to contact us.

Company：MUマテックス
Price：Other

cement
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

低炭素型半たわみ性舗装用プレミックス注入材『ホソーエースeco』

原材料由来のCO2排出量約40％減。高い流動性と優れた強度発現性も両立

『ホソーエースeco』は、当社従来品比で製造時のCO2排出量を約40％削減し、脱炭素化の推進に貢献する半たわみ性舗装用プレミックス注入材です。産業副産物と特殊混和剤を活用することで、環境負荷を抑えながらも高い流動性と優れた強度発現性を実現しています。「早強型」「普通型」の2タイプをラインアップしており、用途や交通開放までの時間に応じて選択可能です。【特長】 ■環境に配慮した半たわみ性舗装用プレミックス注入材 ■ホソーエース従来品と比較し、原材料由来のCO2排出量約40％減 ■原材料をプレミックス済みのため、現場での作業が容易 ■1日または3日で交通開放が可能 ※詳しくは資料をご覧ください。お問い合わせもお気軽にどうぞ。

Company：MUマテックス
Price：Other

Paving Materials
Injection material

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Injection material Product List and Ranking from 22 Manufacturers, Suppliers and Companies | IPROS

Injection material Manufacturer, Suppliers and Company Rankings

Injection material Product ranking